# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
[[ -f ~/.zsh/.powerline_config ]] && source ~/.zsh/.powerline_config
[[ -f ~/.zsh/.user_config ]] && source ~/.zsh/.user_config
[[ -f ~/.zsh/.virtual_env_config.zsh ]] && source ~/.zsh/.virtual_env_config.zsh
[[ -f ~/.zsh/.local_config ]] && source ~/.zsh/.local_config

# On shell start, bring ~/dotfiles up to date by fast-forwarding the CURRENT
# branch to its upstream only. Never rebase or stash in the background: if the
# branch diverged or local edits block it, warn and leave it for a manual pull.
# Per-branch, so `server` on each device fast-forwards to origin/server.
update_dotfiles() {
    local repo="$HOME/dotfiles"
    # Bound the network call so a stalled fetch can't wedge this backgrounded
    # (&!) job into a days-long orphan holding unreaped children. `timeout` is
    # absent on macOS, so only use it when present. Disable ssh multiplexing so
    # no daemonized mux master can inherit and keep our fds open past git's exit.
    local -a TO; (( $+commands[timeout] )) && TO=(timeout -k 5 15)
    GIT_SSH_COMMAND='ssh -o BatchMode=yes -o ConnectTimeout=5 -o ControlMaster=no -o ControlPath=none' \
        $TO git -C "$repo" fetch --quiet </dev/null 2>/dev/null || return
    git -C "$repo" rev-parse --abbrev-ref '@{u}' >/dev/null 2>&1 || return    # no upstream
    git -C "$repo" merge-base --is-ancestor '@{u}' HEAD 2>/dev/null && return # already current
    git -C "$repo" merge --ff-only --quiet '@{u}' 2>/dev/null \
        || print -u2 "⚠ dotfiles: $(git -C "$repo" symbolic-ref --short HEAD) can't fast-forward to @{u} — run: git -C ~/dotfiles pull"
}

update_dotfiles &!

# On shell start, check the security tools repo for upstream updates and print a
# one-line notice if the checkout is behind. Notify only (never auto-pull). This
# stays read-only so it works even when the repo lives in root-owned /opt/tools:
#   - `safe.directory=*` sidesteps git's "dubious ownership" refusal on a repo
#     owned by root, which would otherwise fail every git command.
#   - `ls-remote` queries the remote without writing into .git (a normal user
#     can't write a root-owned .git, so `fetch` would fail there).
# Uses the first candidate that is a git checkout; covers global and per-user layouts.
check_tools_repo() {
    local repo branch remote mergeref remote_sha local_sha cmd
    # See update_dotfiles: bound the network probe (timeout, absent on macOS) and
    # disable ssh multiplexing so a stalled ls-remote can't orphan this &! job.
    local -a TO; (( $+commands[timeout] )) && TO=(timeout -k 5 10)
    for repo in /opt/tools "$HOME/tools" "$HOME/tools/tools-repo"; do
        local -a g=(git -c 'safe.directory=*' -C "$repo")
        $g rev-parse --is-inside-work-tree >/dev/null 2>&1 || continue
        branch=$($g symbolic-ref --short HEAD 2>/dev/null) || return
        remote=$($g config "branch.$branch.remote" 2>/dev/null) || return         # no upstream
        mergeref=$($g config "branch.$branch.merge" 2>/dev/null) || return
        remote_sha=$(GIT_SSH_COMMAND='ssh -o BatchMode=yes -o ConnectTimeout=5 -o ControlMaster=no -o ControlPath=none' \
            $TO $g ls-remote "$remote" "$mergeref" </dev/null 2>/dev/null | awk '{print $1}')
        local_sha=$($g rev-parse HEAD 2>/dev/null)
        [[ -n "$remote_sha" && -n "$local_sha" ]] || return                       # remote unreachable
        [[ "$remote_sha" == "$local_sha" ]] && return                             # already current
        $g merge-base --is-ancestor "$remote_sha" HEAD 2>/dev/null && return       # remote is an ancestor: ahead/equal (also true if we lack the object -> falls through to "behind")
        [[ -w "$repo/.git" ]] && cmd="git -C $repo pull" || cmd="sudo git -C $repo pull"
        print -u2 "⬆ tools: updates available in $repo — run: $cmd"
        return
    done
}
check_tools_repo &!
export LC_OSC52=1

# Load Antidote
mkdir -p ${ZDOTDIR:-~}/.cache/zsh
static_file=${ZDOTDIR:-~}/.cache/zsh/.zsh_plugins.zsh
plugins_txt=${ZDOTDIR:-~}/.zsh/.zsh_plugins.txt
# clone antidote if necessary
if ! [[ -e ${ZDOTDIR:-~}/.antidote ]]; then
  git clone https://github.com/mattmc3/antidote.git ${ZDOTDIR:-~}/.antidote
fi

zstyle ':completion:*:ssh:*' hosts off
zstyle ':completion:*:scp:*' hosts off

# Run rehash for external commands
zstyle ":completion:*:commands" rehash 1
# source antidote and load plugins from `${ZDOTDIR:-~}/.zsh_plugins.txt`
source ${ZDOTDIR:-~}/.antidote/antidote.zsh
antidote load ${plugins_txt} ${static_file}

setopt interactivecomments

# History options
HISTSIZE=100000                  # Set the amount of lines you want saved
SAVEHIST=100000                  # This is required to actually save them, needs to match with HISTSIZE
setopt EXTENDED_HISTORY          # Write the history file in the ":start:elapsed;command" format.
setopt INC_APPEND_HISTORY        # Write to the history file immediately, not when the shell exits.
setopt SHARE_HISTORY             # Share history between all sessions.
setopt HIST_EXPIRE_DUPS_FIRST    # Expire duplicate entries first when trimming history.
setopt HIST_IGNORE_DUPS          # Don\'t record an entry that was just recorded again.
setopt HIST_IGNORE_ALL_DUPS      # Delete old recorded entry if new entry is a duplicate.
setopt HIST_FIND_NO_DUPS         # Do not display a line previously found.
setopt HIST_IGNORE_SPACE         # Don\'t record an entry starting with a space.
setopt HIST_SAVE_NO_DUPS         # Don\'t write duplicate entries in the history file.
setopt HIST_REDUCE_BLANKS        # Remove superfluous blanks before recording entry.
# Clear screen by ctrl+q
bindkey '^q' clear-screen

# Bind Ctrl-W to kill-region
bindkey "^w" kill-region
bindkey -v
VI_MODE_SET_CURSOR=true

(( $+commands[nvim] )) && alias vim=nvim
alias sudo='sudo '
(( $+commands[nvim] )) && export EDITOR='nvim'
(( $+commands[nvim] )) && export VISUAL='nvim'

alias ls="ls --color=always"
alias cgrep="grep --color=always"

delzip() {
   unzip -Z -1 "$@" |  xargs -I{} rm -rf {}
}
# mitmproxy
export MITMPROXY_SSLKEYLOGFILE="~/.mitmproxy/sslkeylogfile.txt"

[[ -f ~/.zsh/.mac_config.zsh ]] && source ~/.zsh/.mac_config.zsh
if `which go &>/dev/null`; then
    export PATH="$PATH:$(go env GOPATH)/bin"
    export GOPATH=$(go env GOPATH)
fi

# Use safecp/safemv from the tools-repo when available (after ~/.local/bin is on PATH)
(( $+commands[safecp] )) && alias cp=safecp
(( $+commands[safemv] )) && alias mv=safemv

if [[ -f ~/.ssh/sudo_key ]]; then 
    [[ -e /tmp/sudo-agent.sock ]] || ssh-agent -a /tmp/sudo-agent.sock &> /dev/null
    SSH_AUTH_SOCK=/tmp/sudo-agent.sock ssh-add -l | grep -q `ssh-keygen -lf ~/.ssh/sudo_key | awk '{print $2}'` || SSH_AUTH_SOCK=/tmp/sudo-agent.sock ssh-add ~/.ssh/sudo_key
fi

# Sudo workaround for neovim
export SUDO_ASKPASS=$(command -v ssh-askpass)

# Workaround for async issues https://github.com/romkatv/powerlevel10k/issues/1554
unset ZSH_AUTOSUGGEST_USE_ASYNC

# Fixate language
export LANG="en_US.UTF-8"
export LC_CTYPE="en_US.UTF-8"
export TIME_STYLE="long-iso"

# Powerlevel 10k
# Remove padding on right side
ZLE_RPROMPT_INDENT=0

# To customize prompt, run `p10k configure` or edit ~/dotfiles/zsh/.p10k.zsh.
function load_p10k() {
    if test -f ~/dotfiles/zsh/.p10k.mac.zsh; then 
        source ~/dotfiles/zsh/.p10k.mac.zsh
    else
        [[ ! -f ~/dotfiles/zsh/.p10k.zsh ]] || source ~/dotfiles/zsh/.p10k.zsh
    fi
}
load_p10k

alias screenshot_mode='powerlevel10k_plugin_unload; export PS1="$ "; python3 ~/.config/alacritty/screenshot_mode.py on'
alias screenshot_mode_off='prompt_powerlevel9k_setup; python3 ~/.config/alacritty/screenshot_mode.py off'
antidote update &> /dev/null &|

# This speeds up pasting w/ autosuggest
# https://github.com/zsh-users/zsh-autosuggestions/issues/238
pasteinit() {
  OLD_SELF_INSERT=${${(s.:.)widgets[self-insert]}[2,3]}
  zle -N self-insert url-quote-magic # I wonder if you'd need `.url-quote-magic`?
}

pastefinish() {
  zle -N self-insert $OLD_SELF_INSERT
}
zstyle :bracketed-paste-magic paste-init pasteinit
zstyle :bracketed-paste-magic paste-finish pastefinish

# https://github.com/zsh-users/zsh-autosuggestions/issues/351
ZSH_AUTOSUGGEST_CLEAR_WIDGETS+=(bracketed-paste)
export PATH=$PATH:/Users/ising/.runai/bin
source <(/Users/ising/.runai/bin/runai --quiet completion zsh)
